|
|
Build Your Online Product Catalogs?
| Product Name: |
OKD-FW01 Stainless steel Vertical installation flow switch level
|
| Supply Ability: |
10000 |
| Related proudcts |
float switch, level switch, water level sensor, |
| Specifications |
G1/2 |
| Price Term: |
FOB |
| Port of loading: |
|
| Minimum Order |
10 |
| Unit Price: |
$6.5 |
|
The principle of operation
Liquid level sensors by the composition of reed switches and float, reed switch encapsulated in the guide, and a ring magnet is equipped in the float, when the float moves up and down with the measured of liquid level,and the internal magnet to attract magnetic reed switch contact action,so that it can to ***ect the liquid level position.
Applications
The product is mainly used in household appliances (such as: water machine, water dispenser, humidifier, dehumidifier, water heater, air conditioning, direct drinking water system, family, etc.), industrial equipment (such as: air hydraulic machine, Cooler, drainage, lubricating oil system), gardening equipment, medical equipment, beauty salon equipment, aquatic farming and industrial water purification, sewage treatment systems, automatic door control system and other industries.
According to different customers, the special needs of different environments, the product has a variety of sizes, a variety of materials available, can also accept custom.
Electrical parameters
Date scan 1A1 2A1
Max Contact Rating 10W 50W
Max Switching Voltage 100VAC/100VDC 300VAC/350VDC
Max Switching Current 0.5A DC0.7A/AC0.5A
Max Breakdown Voltage 110V 300VAC/350VDC
Max Carry Current 1.0A 2.5A
Max Contact Resistance 100m¦¸ 100m¦¸
Temperature range -10~+85℃ -10~+85℃
Float Ball Materia pp pp
Float Body Material pp pp
Mounting Top or bottom of the vertical installation, optional right-angle elbow (lateral installation)
Installation dimensions M08,M10(lateral installation)
Operating Characteristics Floating on or fall on (optional)
Working Medium Water, oil, chemical media
Temperature range ¨C10~+85℃
Pressure range 0.2***
Installation instructions
1.Should be mounted away from the inlet, or switch will caused malfunction by the fluctuations in intake.
2.The load must be controlled circuit capacity with float switch contacts to match.
3.The proportion of liquid to be measured must be greater than the proportion of float.
|
| Company: |
Shenzhen OKD Technology Co.,Ltd
|
| Contact: |
Ms. Jolen chong |
| Address: |
4c163 4F Huaqiang electric world three Futian distric |
| Postcode: |
518031 |
| Tel: |
86-755-61348892 |
| Fax: |
86-755-28286916 |
| E-mail: |
|
|
|
|
Home
